Brownfield first
Designed to work in terminals as they are, localising with RTK-GNSS and lidar against an HD map rather than infrastructure built into the yard surface.
Ports handle hundreds of millions of containers a year, yet only a small share of terminals are automated. The rest depend on drivers who are expensive, hard to hire and exposed to some of the highest injury rates in industry.
Forecasts differ by scope, but they point the same way: more containers, more electric equipment and a fast-rising number of autonomous vehicles at the quay.
| Segment | Figure | Period | Growth | Note |
|---|---|---|---|---|
| Terminal tractors (all drivetrains)5 | $1.55B → $2.25B | 2025–2032 | 5.5% CAGR | Electric is the fastest-growing segment. |
| Automated guided vehicles at seaports4 | 370,000+ deployed | by 2030 | 26%+ CAGR | Driven by congestion and labour constraints. |
| Global container throughput1 | 858M TEU | 2023 | +33% since 2013 | Volume keeps rising faster than terminal land. |
| Terminal automation penetration2 | 7.3% by count | Main terminals | 12.2% by area | Most capacity is still manually operated. |
Third-party forecasts, reproduced as published. Market definitions vary between publishers.
Terminal work combines heavy, fast-moving machinery with people on foot. The most common way port workers die is being crushed by cargo; the second is being struck by handling equipment.6
US marine-terminal fatality rate, 2011–2017: roughly five times the rate for all workers.
Non-fatal injuries a year among US marine-terminal workers over the same period.
Deaths in port cargo handling logged worldwide between 2000 and mid-2025.
Published prices for the vehicles terminals buy now, and what they cost to run. These are the figures an autonomous electric fleet has to beat.
| Item | Approximate cost | Basis |
|---|---|---|
| Diesel terminal tractor (Tier 4)7 | ≈ US$120–125k | Unit price |
| Electric terminal tractor8 | ≈ US$270k | Unit price incl. charging |
| Straddle carrier9 | ≈ NZ$2.8M | Unit price (10-unit order) |
| Automated container terminal10 | ≈ US$1.4–1.5B | Long Beach, 3.3M TEU capacity |
| Operating cost, diesel yard tractor11 | ≈ US$36/hour | Excluding driver |
| Operating cost, electric yard tractor11 | ≈ US$11/hour | Excluding driver and electricity |
| Registered longshore worker, US West Coast12 | ≈ US$243k/year | Average full-time earnings, 2024 |
Approximate figures from public sources, several published by equipment vendors or public fleets. Prices vary by market, specification and year. General Axis does not publish vehicle pricing.
Take one diesel yard tractor working 6,000 hours a year. Staffing it takes about 3.3 drivers. At US West Coast pay, labour comes to roughly 79% of its annual running cost. Going electric cuts the machine's own operating cost by about two thirds; autonomy addresses the rest.
Illustration only, not a General Axis quote. Assumes 6,000 operating hours and 1,800 working hours per driver a year; driver cost from the PMA 2024 average12; operating cost per hour from a public fleet comparison11. Excludes purchase, maintenance not captured in those figures, electricity, and the supervision an autonomous fleet still needs. Wages are lower in most other markets.
Driven diesel tractor, per year: $1,026k
Fully automating Long Beach Container Terminal cost around $1.4–1.5 billion.10 Vendors put automated terminals at roughly twice the capital cost of manual ones, recovered through running costs more than halved.13 Most of the world's terminals cannot rebuild to get there.
Designed to work in terminals as they are, localising with RTK-GNSS and lidar against an HD map rather than infrastructure built into the yard surface.
Terminals can start with one route and a handful of vehicles, then scale, instead of committing to a whole-site conversion.
Every vehicle replaces a diesel cab and its shifts at once, so the energy saving and the labour saving arrive in the same purchase.
Operators can scope a pilot; investors can request materials on where the company stands.